Need new pouch - Electrician Talk - Professional Electrical Contractors Forum

gilbequick · 12-07-2008, 12:01 AM

I need a new tool pouch, I've had mine for many years and it gets very uncomfortable as it rubs my leg throughout the day.

Anyone ever used either of these? Or does anyone know of a small sized pouch with a padded back to it?

Mr 440 · 12-07-2008, 08:29 AM

I'ms prefer the deep one.
because the tool stay on place wen you walk...or running

Jeff000 · 12-07-2008, 12:10 PM

What are your doing and how many tools do you need?

I have and like the Klein electrcians belt, with the padded belt. Both those look too small for me, for just a couple tools like that I just keep them in my carhartts.

BryanMD · 12-07-2008, 12:19 PM

Picking a tool pouch for another can be as complicated as picking a wife for him.

MechanicalDVR · 12-07-2008, 01:46 PM

Quote:

Originally Posted by gilbequick

I need a new tool pouch, I've had mine for many years and it gets very uncomfortable as it rubs my leg throughout the day.

Anyone ever used either of these? Or does anyone know of a small sized pouch with a padded back to it?

I like to use the Carhartt apron with the Klein 5125 attached, it works out nicely. My phone holster clips on the small side pockets on the 5125 also.

electricalperson · 12-07-2008, 05:09 PM

i have the electrician tool rig from klein. its black nylon, comes with pouches, one for tools and the other for nails and screws and a hammer holder. the belt is padded like crazy and its very comfortable to wear. it cost me about 110 dollars for the entire set and its great.

heres what i have http://www.kleinconnection.com/webap...atalogId=10001

i got it cheaper through my supply house. that klein connect site seems expensive

Lz_69 · 12-08-2008, 10:54 PM

Well that klein 5168 is tiny, a guy at work got one for a deal and I think could pack more tools in my back pocket.

How about an occidental pouch like this? I got one with my belt setup and it's a real nice little pouch but too small for all the crap I like to carry. Let me know if you interested.

Occidental Leather 5500 Electrician's Tool Pouch | AceToolOnline.com

gilbequick · 12-09-2008, 05:38 AM

How soft is the leather?

Lz_69 · 12-09-2008, 05:51 PM

I would say it's a little softer then my well broken in Klein pouch.

electricalperson · 12-10-2008, 07:52 PM

when i was learning in school i had a general electric tool pouch i dont even know if they make those anymore

pawpaw702 · 12-13-2008, 01:06 PM

If it takes more tools than I can carry in my pocket to do a certain job, I take my bag with me. Pouch's belong on kangaroos, not electricians. Carrying a pouch breaks down your back, and just shows how wormy you are. Been in this trade for 12 years and don't have one yet.

DDB1205 · 12-13-2008, 01:23 PM

Does carrying every tool you own on your side make you a better electrician? Are you trying to out do the people you are working by doing this?

Wearing a tool pouch does NOT make a more efficient electrician. It actually slows down production over a longer period versus NOT wearing one. Not to mention wearing one over years produces strain on the opposite hip that will cripple you and cause you life long pain.

gilbequick · 12-13-2008, 01:48 PM

Quote:

Originally Posted by DDB1205

Does carrying every tool you own on your side make you a better electrician?

Tool pouches have nothing to do with being a better electrician.

How do you know how many tools I carry on my side? I carry what I need and would like to be more comfortable doing so. Just like we all buy shoes that makes us more comfortable as the day goes on.

Quote:

Originally Posted by DDB1205

Are you trying to out do the people you are working by doing this?

What the hell is this supposed to mean? Who do you think you are?
So everyone is supposed to work at the same pace and accomplish the same amount of work in the same amount of time? So if 3 people come to work sick and don't feel well so they understandably are a bit sluggish throughout the day, we're all supposed to be sluggish so no one out does another? Gee, we certainly don't want to hurt anyone's feelings.

Working hard and efficiently has NOTHING to do with trying to out-do anyone. It has everything to do with getting the job done efficiently and making money at it, and feeling good about myself knowing that I did a job well done that benefits everyone.

Why do you view some one's hard work as trying to put others beneath him, instead of him trying to raise himself up?

Groups of people follow the standard set by their coworkers. If you come on to a job and everyone is working hard it give you the extra mental incentive to work hard as well. On the other hand if there are people around you farting around then people pick up on that vibe and don't produce as much.

I want my company to make as much money as possible so I'll continue to have a job there. If that means I work harder than my fellow brother employees than good for me.... and also good for them.

Quote:

Originally Posted by DDB1205

Wearing a tool pouch does NOT make a more efficient electrician. It actually slows down production over a longer period versus NOT wearing one..

And what do you base this on? Carrying the tools you need to perform the task at hand MOST CERTAINLY makes things get done more efficiently. Are you the guy climbing up and down a ladder all day long because you refuse to carry the tools you need to do your job? Are you the one who'd always bumming tools off of everyone else because you don't want to walk back to your tool bucket to get the tool you need? I hope you're not. That's the guy that drags everyone down. How productive is that?

Kevin J · 12-13-2008, 02:06 PM

And what do you base this on? Carrying the tools you need to perform the task at hand MOST CERTAINLY makes things get done more efficiently. Are you the guy climbing up and down a ladder all day long because you refuse to carry the tools you need to do your job? Are you the one who'd always bumming tools off of everyone else because you don't want to walk back to your tool bucket to get the tool you need? I hope you're not. That's the guy that drags everyone down. How productive is that?[/quote]
I agree whole heartedly. I cant stand the guy who wont carry the tools he needs for the job and decides to bum from everyone else. I dont like to carry tools either, but unless I become a general contractor, I guess I'll need them. For me, I like to use a carpenters apron to carry my tools. It keeps the load balanced on both hips and the tools are conveniantly located in the front. Different strokes for different folks.

BryanMD · 12-13-2008, 02:34 PM

Quote:

Originally Posted by Kevin J

I agree whole heartedly. I cant stand the guy who wont carry the tools he needs for the job and decides to bum from everyone else...

On most jobs you'll be doing X for the morning or all day or for two weeks and KNOW it... so you can reasonably limit what tools you carry to just the ones you need to do X.

Have your "bag of tricks" in the corner (or in the gang box) for when something comes up or to switch around for the afternoon doing Y... and then carry just those things.

And then there are the Leads and Foremen who don't have a clue and will switch you up from doing X to do Y to do Z and all before lunch. These are the ones (I've found) who want their guys to be tooled up with everything all day long.

PPPPPP. A failure to plan on your part does not constitute an emergency on my part.

My choice is actually an ironworkers pouch:

DDB1205 · 12-13-2008, 02:50 PM

Quote:

Originally Posted by gilbequick

Tool pouches have nothing to do with being a better electrician.

How do you know how many tools I carry on my side? I carry what I need and would like to be more comfortable doing so. Just like we all buy shoes that makes us more comfortable as the day goes on.

What the hell is this supposed to mean? Who do you think you are?
So everyone is supposed to work at the same pace and accomplish the same amount of work in the same amount of time? So if 3 people come to work sick and don't feel well so they understandably are a bit sluggish throughout the day, we're all supposed to be sluggish so no one out does another? Gee, we certainly don't want to hurt anyone's feelings.

Working hard and efficiently has NOTHING to do with trying to out-do anyone. It has everything to do with getting the job done efficiently and making money at it, and feeling good about myself knowing that I did a job well done that benefits everyone.

Why do you view some one's hard work as trying to put others beneath him, instead of him trying to raise himself up?

Groups of people follow the standard set by their coworkers. If you come on to a job and everyone is working hard it give you the extra mental incentive to work hard as well. On the other hand if there are people around you farting around then people pick up on that vibe and don't produce as much.

I want my company to make as much money as possible so I'll continue to have a job there. If that means I work harder than my fellow brother employees than good for me.... and also good for them.

And what do you base this on? Carrying the tools you need to perform the task at hand MOST CERTAINLY makes things get done more efficiently. Are you the guy climbing up and down a ladder all day long because you refuse to carry the tools you need to do your job? Are you the one who'd always bumming tools off of everyone else because you don't want to walk back to your tool bucket to get the tool you need? I hope you're not. That's the guy that drags everyone down. How productive is that?

Ill bet you have a battery drill that you supply your employer too dont you. If you are running conduit why would you need a pouch full of wire cutters, strippers, numerous screw drivers, etc...? To carry a pouch is silly to say the least. After walking around with 35 pounds of tools strapped to your side for 8 to 12 hours a day, climbing ladders and bending over constantly your production will fall because you are worn out alot quicker than a guy who carries the tools he needs for the particular job he is doing, in his pockets or on his person. Think about it.

oldman · 12-13-2008, 03:03 PM

Quote:

Originally Posted by DDB1205

Ill bet you have a battery drill that you supply your employer too dont you. If you are running conduit why would you need a pouch full of wire cutters, strippers, numerous screw drivers, etc...? To carry a pouch is silly to say the least. After walking around with 35 pounds of tools strapped to your side for 8 to 12 hours a day, climbing ladders and bending over constantly your production will fall because you are worn out alot quicker than a guy who carries the tools he needs for the particular job he is doing, in his pockets or on his person. Think about it.

different types of work require different types of tools...if you are running conduit, you are correct...if you are troubleshooting in a house, you are incorrect...in that case, having tools saves time...

while I am comfortable walking into a factory with linemans, channel lock, 11-in-1 and a beater flathead to fix just about anything...doesn't make me right...

DDB1205 · 12-13-2008, 03:09 PM

Quote:

Originally Posted by oldman

different types of work require different types of tools...if you are running conduit, you are correct...if you are troubleshooting in a house, you are incorrect...in that case, having tools saves time...

while I am comfortable walking into a factory with linemans, channel lock, 11-in-1 and a beater flathead to fix just about anything...doesn't make me right...

How many tools do you need to trouble shoot? Good grief what a meter, a 5 in 1 at most and a pair of side cutters maybe a pair of strippers if need be, but that is about it. Your gonna need that hammer hanging off your side to beat the peoples walls in when you walk in there house. Dont forget to knock over the nick knacks with that pouch too.

Think about it.

oldman · 12-13-2008, 03:24 PM

Quote:

Originally Posted by DDB1205

How many tools do you need to trouble shoot? Good grief what a meter, a 5 in 1 at most and a pair of side cutters maybe a pair of strippers if need be, but that is about it. Your gonna need that hammer hanging off your side to beat the peoples walls in when you walk in there house. Dont forget to knock over the nick knacks with that pouch too.

Think about it.

i do...i don't get it, but then again I use linemans to strip wire, so what do i know...i just don't see the need to tell a man he's wrong for his personal preference...

Kevin J · 12-13-2008, 04:26 PM

old mans exactly right. Everyone has different preferences about what they want to carry. Personally when I troubleshoot, I like to have my tools with me. And no, I dont carry my hammer when I troubleshoot, I leave it in the truck. Also, I find it a waste of time to run back and forth getting the tools I need out of a job box instead of just carrying them. I aint saying carry all your tools, but carry what you think you might need. Seems more efficient to me.