Electrician Talk - Professional Electrical Contractors Forum - View Profile: eddy current
CLICK HERE AND JOIN OUR COMMUNITY TODAY, IT'S FREE!
Go Back   Electrician Talk - Professional Electrical Contractors Forum > Members List


eddy current eddy current is offline

Light Bender

Visitor Messages

Showing Visitor Messages 1 to 2 of 2
  1. ComputerGuy
    04-13-2020 04:33 AM - permalink
    ComputerGuy
    I am located in Canada and have spent the last two years trying to find older code books and electrical catalogs. After seeing your post on here that you are collecting older code books I had to find a way to contact you. Could you please scan any old code books or catalogs that you have and upload them to archive.org and/or post links on here. I have found some good stuff on these forums and archive.org about older electrical systems. I love collecting old wiring devices, panels, and other older artifacts and learning about them. Unfortunately, I have not been able to find any CEC books or any post 1950s electrical catalogs. Let me know what you have. Thank you for your time and stay safe.
  2. Deves22
    03-17-2020 08:49 PM - permalink
    Deves22
    I found out that I was unsuccessful on the exam. I felt like it was close when I wrote it but felt that with the wording of the questions I was unprepared. I didn't know what they were, for a few as they were asking what the no start condition of the motor was? It would have been nice to get some questions with the Diagrams as they were something we never were given during our practice exams in school. Any suggestions on the reading of questions in the exams>?

About Me

  • About eddy current
    What is your electrical related field/trade:
    IBEW Training Director/ Master Electrician
    General Location
    Canada

Statistics

Total Posts
Visitor Messages
Total Thanks
General Information
  • Last Activity: Today 12:41 AM
  • Join Date: 02-28-2009
  • Referrals: 0

Friends

Showing Friends 1 to 3 of 3

Mentions

06-24-2020
05:47 PM - eddy current mentioned Juggernaut1 in post Feasability/outlook of electricians in BC
Juggernaut1, Here is the big que...
06-17-2020
01:31 AM - Kevin_Essiambre mentioned eddy current in post Gems of the Trade
... confusing to me... eddy current what do you think ab...
05-31-2020
10:21 PM - eddy current mentioned 99cents in post Stupid specs. What do you do?
99cents, what is in the spec...
05-27-2020
03:02 PM - Navyguy mentioned eddy current in post Largest 100 amp panel?
So if eddy current is right, I can dump...
01:55 PM - Navyguy mentioned eddy current in post Largest 100 amp panel?
So if eddy current is right, I can dump...
05-25-2020
09:45 AM - eddy current mentioned ACA in post Conductor sizing 125a subpanel
ACA, you are correct tha...
05-23-2020
06:00 PM - eddy current mentioned Drsparky14 in post Ground rod requirements.
Drsparky14, jail time for atte...
05-17-2020
06:41 PM - eddy current mentioned Mobius87 in post Bundling NMD - Canada
Mobius87, was just a simple q...
05-16-2020
11:42 PM - eddy current mentioned Mobius87 in post Bundling NMD - Canada
Mobius87, it’s so simple. W...
08:30 PM - eddy current mentioned Mobius87 in post Bundling NMD - Canada
Mobius87, no Ontario and Cana...
05-14-2020
12:49 PM - eddy current mentioned Mobius87 in post Bundling NMD - Canada
Mobius87, no, you are not und...
05-13-2020
04:48 PM - eddy current mentioned Mobius87 in post Bundling NMD - Canada
Mobius87, how do they derate ...
03:16 PM - eddy current mentioned Mobius87 in post Bundling NMD - Canada
...15 amp circuit. Mobius87, to answer your ques...
05-05-2020
04:34 PM - eddy current mentioned haltonelectrician in post Transformer Overcurrent Protection - Upsize Wire to Match Breaker
haltonelectrician, not just subrule 4...
04:13 PM - eddy current mentioned haltonelectrician in post Transformer Overcurrent Protection - Upsize Wire to Match Breaker
haltonelectrician, yes sorry, you are ...
03:20 PM - Kevin_Essiambre mentioned eddy current in post Transformer Overcurrent Protection - Upsize Wire to Match Breaker
... have to agree with eddy current. As the overcurrent ...
04-29-2020
12:17 PM - batcave mentioned eddy current in post 309A Pre-Exam
eddy current : My bad, You can ma...
11:35 AM - batcave mentioned eddy current in post 309A Pre-Exam
...llege looks at it. eddy current, do you think the st...
10:39 AM - Kevin_Essiambre mentioned eddy current in post 309A Pre-Exam
...ategory as well. eddy current, do you think the st...
04-23-2020
05:00 PM - Kevin_Essiambre mentioned eddy current in post Double Tapping the Secondary of Transformer (Rules 26-256 3) and 14-100 c) and d))
...lp. Paging 908Eng eddy current The_Modifier Sent...

Quotes

07-09-2020
12:00 AM - eddy current quoted mofos be cray in post Hot tub sub panel adding a receptacle
If its feeding a mixed use sub pan...
07-08-2020
08:55 PM - NDC quoted eddy current in post Hot tub sub panel adding a receptacle
No. The overcurrent in a main pan...
07-06-2020
11:49 AM - eddy current quoted Navyguy in post Ontario - Risk based oversight and ACP
This was my first google fin...
11:32 AM - eddy current quoted Navyguy in post Ontario - Risk based oversight and ACP
There was something a couple...
11:26 AM - eddy current quoted Navyguy in post Ontario - Risk based oversight and ACP
If homedepot has to supply t...
11:19 AM - eddy current quoted NDC in post Ontario - Risk based oversight and ACP
All ESA has to do is loo...
07-03-2020
10:34 AM - HackWork quoted eddy current in post 400 amp main lugs help please
With the Canadian rules, because ...
10:03 AM - eddy current quoted CoolWill in post 400 amp main lugs help please
I don’&#x...
09:56 AM - CoolWill quoted eddy current in post 400 amp main lugs help please
I don’t think that. Read my pos...
09:19 AM - eddy current quoted CoolWill in post 400 amp main lugs help please
Obviously, whoever did a job ...
08:41 AM - CoolWill quoted eddy current in post 400 amp main lugs help please
I’d say you guys are the ones w...
08:37 AM - HackWork quoted eddy current in post 400 amp main lugs help please
I think you have spent most of yo...
08:23 AM - eddy current quoted HackWork in post 400 amp main lugs help please
Like I said, I’ve never see...
12:25 AM - HackWork quoted eddy current in post 400 amp main lugs help please
I’d say you guys are the ones w...
12:19 AM - eddy current quoted HackWork in post 400 amp main lugs help please
Our rules are easy, no confus...
12:06 AM - HackWork quoted eddy current in post 400 amp main lugs help please
Our rules are easy, no confusion....
07-02-2020
11:55 PM - CoolWill quoted eddy current in post 400 amp main lugs help please
Our rules are easy, no confusion....
11:35 PM - HackWork quoted eddy current in post 400 amp main lugs help please
Maybe in a house it’s not an is...
11:33 PM - eddy current quoted HackWork in post 400 amp main lugs help please
As the simple-minded guy abov...
09:48 PM - HackWork quoted eddy current in post 400 amp main lugs help please
It makes sense that they are the ...

All times are GMT -4. The time now is 05:07 AM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Our Pro Sites Network
ContractorTalk.com | DrywallTalk.com | HVACSite.com | PaintTalk.com | PlumbingZone.com | RoofingTalk.com