Electrician Talk banner

Discussions Showcase Albums Media Media Comments Tags

1-4 of 4 Results
  1. Residential Electrical Forum
    Hey All! I can't for the life of me figure this one out. A 2-Pole Eaton AFCI breaker, supporting a MWBC, that has been installed for ~ a year has suddenly started tripping consistently. One leg of the MWBC has a Garage Door Opener, two Lutron Caseta/RA2 Dimmers, three non-dimmer Lutron...
  2. Residential Electrical Forum
    I took a looks at this house. They have a feed from the house to the subpannel in the detached garage. The breaker from the house feeding the garage trips sometimes in 1 hour sometimes in a day. I couldn't find any short and the panel in the garage doesn't trip. It goes underground from the...
  3. Residential Electrical Forum
    I have a double pole circuit that, when I try to turn the breaker on with no appliances connected and 99.999% certain there's no short circuit, it does not want to stay in the on position. If I push it 2-3 times, it will stick in the on position. When I have one appliance connected (1 wall...
  4. General Electrical Discussion
    We have installed 11 rows of 8ft T8 flourescent fixtures with four 4ft lamps in each fixture on a job. Each row has 12 fixtures on it drawing approximately 11.5 amps per row. Each row is on a dedicated 20 amp circuit. The lights are controlled by a GE 12 pole lighting contactor. The same row...
1-4 of 4 Results
Top