Electrician Talk banner
plug
1-4 of 4 Results
  1. General Electrical Discussion
    Hi, I just returned to a new remodel with new laundry room. Plugged in W/D and ran the washer. Came home to a melted plug & socket, black soot up the wall BUT THE BREAKER DIDN'T TRIP. The contractor & electrician came out the next morning and claimed - after replacing the plug - that the...
  2. PLCs, VFDs, Motors and Controls
    I need to wire a 'remote' motor control station - a box with up and down buttons. I will use 14/4 SJOW cable (1 bonding conductor and 3 for control). The control voltage is 240V. What kind of plug and receptacle should I use to wire it into motor control box (it has to be unpluggable)?
  3. PLCs, VFDs, Motors and Controls
    Dear Electricians, I am looking for somebody who can help me with wiring of solenoids with a plug so that I can get a push/pull when the solenoids are getting electrical power. This electrical power will be supplied through a switch board that will have a plug attached with a wired solenoid...
  4. UK Electrical Forum
    From time to time the subject of counterfeit UK plugs and power leads is discussed on this and other forums. Counterfeit plugs are often distinguished by having partially sleeved earth pins in clear contravention of BS 1363, that means that they cannot be legally sold (The Plugs & Sockets etc...
1-4 of 4 Results
Top