Electrician Talk banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-4 of 4 Results
  1. General Electrical Discussion
    Looking for code compliant suggestions for transitioning from TECK 2/3 and 3/3 into multiple buildings. Current thoughts are as follows: Part 1 1) use wet rated TECK connector to an EMT LB then EMT into the building to the panel 2) sleeve the cable from 12 inches below grade to the LB...
  2. General Electrical Discussion
    Hi guys. I'm running teck underground to a shop and where it goes into the side of my house to the panel I'll be using PVC up from the ground into a PVC LB and I cannot bend it to have the outer sheathing and armour to go continuously into the panel so I need to cut the outer jacket and armour...
  3. Canadian Electrical Forum
    Hi All I am installing a 100 amp sub panel in a garage. The feed is coming from the 200 amp main in the house. I will be burying teck cable. The teck cable will come out of the ground at the garage and go straight into the back of the panel. My issue is what is the proper way to go through...
  4. Electrician Swap Classifieds
    Selling 80ft of 4 conductor 2 AWG Teck Cable. I'm located in Hamilton, Ontario. $600
1-4 of 4 Results