Hey guys, im having a brain fart on how to wire a analog card on the twido plc platform from schnieder electric. The analog card is a TWDAMM6HT and I have a separate power supply supplying power to the analog card and to the analog input loop field. Where I get lost is that im trying to connect it to a altivar 312 drive and controlling it via a analog output from the plc analog card to control speed. Im also getting a analog output from the drive regarding its current frequency output to display on a HMI. The input and output use the same common on the drive, and im lost on how to wire it with the analog card. Am I over thinking this? Anyone else wire with the twido platform?