Electrician Talk banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1,315 Posts
Always best to serve encoded signals from a proprietary splitter. Losses are great when cables are looped together. Of course you may get lucky and be able to loop tv's ' one from the other to the other'. Depends really how much gain you have at the primary input. So a splitter with l in and two out is the best choice. The splitter will contain self powered circuitry helpful to the output stages.


You need this sort of thing. Costs about $50.


Satellite signals are digital so be sure to uses a corresponding coax, And if you are using the coax as an integral 12volt signal return so as to use a handset to switch the Satellite Receiver channels keep joints to a minimum.


Frank
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top