Electrician Talk banner
1 - 1 of 1 Posts

·
Registered
Joined
·
3,278 Posts
2-308
The space referred to in Subrule (1) shall be in addition to the space required for the operation of drawout-type equipment in either the connected, test, or fully disconnected position and shall be sufficient for the opening of enclosure doors and hinged panels to at least 90°.

Also don't get hung up on the 1 meter clearance. Table 56 changes that based on voltages.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top