I'm not a fan of those clip connections, especially when high current is travelling. Seems like a loose connections that caused resistance/heat.
I have noticed the newer ones having more pressure, let us know what you find..that is if there's a visible story on the melt down...I agree but those pressure clips do seem to have alot of pressure behind them.
That's right, thanks for kicking around the electrons in my memory. I am now thinking it was the soldering point to the board perhaps..mfr defectTheyre like tinned or soldered ends on the wall plug cord and those come preterminated. The installer puts the car charging cable under pressure clips which are also tinned.
That my friend will be a warranty issue with manufacturer not installer, past the 1 year mark. Reach out to Tesla or have homeowner do so, that is if you don't have time to swing by just to discover it's the Wall Connector and not your wiring.Same and I have one to replace next week. This particular wall connector is just shy of 3 yrs old.
So so green