Electrician Talk banner

Cover plate for Raco 254 box

1151 Views 5 Replies 6 Participants Last post by  Easy
I am looking for an adaptor/decora cover plate to cover a 254 box.

I found these but unfortunately they were not the correct size.

The screw spacing of the box is 4"x4" square.



1 - 6 of 6 Posts

· Registered
I am 100 % retired now. Enjoying life :)
2,223 Posts
You could go with a 4 11/16 mud ring and a jumbo wall plate and that might cover the opening.

Garvin makes a 4-11/16 to 4 in. Square Conversion Plate Cover but I really can't see where they would ever be useful.
Attaches to 4-11/16 in Boxes and Converts the box to accept 4 in Square Device Rings and Covers. They only cost $10 each. Ouch!
Find them here
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.