Electrician Talk banner

Electric to gas range change over

2K views 15 replies 9 participants last post by  A Little Short 
The AL to cu splice will be an issue...only 2 approved methods to do this so commandos way is best IMHO..sub panel accessible someplace? and then run off that....
 
Either way I get sub panels for $29....yes you could put a 4sq under there and split bolt it and change break and re identify 2 split bolts new breaker ect....you do the math....:thumbsup:
 
I would try the upsell panel....but if there is push back split bolts and panel work would work...depends on situation....have seen issue 1x with split bolt but was on 240v range line....sparky didn't use enough tape and proper method to wrap bolt....spark show was on:eek:
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top