Electrician Talk banner

Electric to gas range change over

2K views 15 replies 9 participants last post by  A Little Short 
#1 ·
Hello, I'm new to this forum and trying to get a little help.
Customer wants a new gas stove to replace the existing electric
Range. The house sits on a crawl space, age of the house is maybe
20 yrs. old. Ok here's the question. Can I cut the 6/3 AL that feeds
The current range in the crawl space and splice (in Jbox) with AL/CU
connectors and feed a 120 outlet for new stove controls?? I'm only considering
This because service panel is in a garage with no acces below or above.
Flush mounted panel in wall. House is two story. Thanks for help in advance.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top