Electrician Talk banner
1 - 1 of 7 Posts

· Registered
3,747 Posts
Use the right fittings for the application... Know what Class you are getting into before you start..Sometimes a gasketted fitting will work, where in others you'll need GUA fittings..
Remember about your grounds.. Condulet fittings don't typically have a ground screw, which is why most guys will pull a ground wire..
Plan where you are going to put unions and splice boxes.. Sometimes an extra box and union will make equipment removal easier in the future...
If you're not sure - ASK!!! You aren't the first one to use such wiring methods and lots of guys can help...
1 - 1 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.