Electrician Talk banner

Extension of Emergency circuits

649 Views 1 Reply 2 Participants Last post by  Roger
Since the 2014 NEC will not allow mwbc for emergency circuits, I assume this will apply to any extension of an existing mwbc. Am I correct in this thinking?

At present there is a small job that wants to add another emergency receptacle and relocate an existing one but the existing circuits are all mwbc.
Will this be a code violation to move the existing receptacle that is al ready on the mwbc?
1 - 1 of 2 Posts
1 - 1 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.