Electrician Talk banner
1 - 4 of 4 Posts

·
Electrical Contractor
Joined
·
9,325 Posts
hey I am going to be working and my first job with Insulated Concrete Forms. any advice would be a great help

:help:
Electric chainsaw and either the boxes made by Ipex or I normally use the fiberglass ones with the metal tab. (I think they're Slater) Hold the box up the height you want it, make sure it's against the tie, tap the box to make and imprint, and cut it out. There's a thread somewhere on here dealing with this issue.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top