[btharmy]

Am looking at installing a 30a inlet and interlock kit for my neighbor as a favor/barter. The house was built in 1965 with a 200a ITE panel. None of the kits/measurements from interlock.com seem to correspond to his panel. I know there are other companies/options that I haven't checked yet. The cover has been stripped of stickers and painted inside and out in silver. I understand I can have one made if I provide the measurements. Has anybody had one made? If so, what can I expect as far as price and turn around time. Thanks.

 

[nrp3]

Who else manufactures interlocks besides the manufacturers and Interlokkit?

 

[J. Temple]

I've bought from these guys before:

http://natramelec.com/

Check them out.

 

[nrp3]

Quite a selection.

 

[Southeast Power]

Those after market interlock kits are kinda crappy and I only use them as a last resort.
You can do it by measurements but maybe consider a Cutler Hammer retro fit kit and a factory made interlock kit.

 

[J. Temple]

Those after market interlock kits are kinda crappy and I only use them as a last resort.
You can do it by measurements but maybe consider a Cutler Hammer retro fit kit and a factory made interlock kit.

I agree, but some times "cheap and easy" is what the customer wants.

 

[Southeast Power]

I agree, but some times "cheap and easy" is what the customer wants.

Ok then,
Is that an old ITE main??

 

[btharmy]

Ok then, Is that an old ITE main??

Yes. ITE main.

 

[Maximumbob]

Do you have room to put a generator panel next to the main panel?

 

[btharmy]

Do you have room to put a generator panel next to the main panel?

Sure, but I would rather stick in an interlock kit and be done with it.

 

[AZ86]

http://geninterlock.com/product_ite.html

Located in NJ.

 

[rewire]

http://geninterlock.com/product_ite.html

Located in NJ.

will these work on an older ITE panel?

 

[AZ86]

will these work on an older ITE panel?

I'm not sure. You can give them a call and find out. I've only used their square d ones and did not have any problems

 

[Gamit]

I'm not sure. You can give them a call and find out. I've only used their square d ones and did not have any problems

If kit is not UL listed we can not use it in NJ

 

[AZ86]

If kit is not UL listed we can not use it in NJ

The one I bought from them was actually a square d branded item. I emailed them for the original poster, I will respond back with an answer.

 

[btharmy]

http://geninterlock.com/product_ite.html Located in NJ.

Those 3 configurations don't look like they will fit my application.

 

[AZ86]

Those 3 configurations don't look like they will fit my application.

I emailed them for you with the picture you attached.

 

[BuzzKill]

Bryant breakers! I love those things! Colored handles, came in blue, green and red..

 

[Roadking Classic]

Try natramelec.com.

 

[btharmy]

Try natramelec.com.

Actually, the closest to my panel is the sqD kit. Possibly the GE kit. I am getting measurements tomorrow and contacting them for a price. My 2nd option is to check a couple neighbors panels to see if they are the same and have the labels in place.