Electrician Talk banner
1 - 20 of 24 Posts

·
NJ-IEC
Joined
·
14,387 Posts
Discussion Starter · #1 ·
You know this sort of thing never happens!

Sarcasm!

We don't know the whole story here but it's wise to read the other trades plans as well as your own, especially any contained notes.
 

Attachments

·
I own stock in FotoMat!
Joined
·
39,117 Posts
You know this sort of thing never happens!

Sarcasm!

We don't know the whole story here but it's wise to read the other trades plans as well as your own, especially any contained notes.


Uh....... what plans? :001_huh:
 

·
Registered
Joined
·
5,687 Posts
Magnettica said:
You know this sort of thing never happens! Sarcasm! We don't know the whole story here but it's wise to read the other trades plans as well as your own, especially any contained notes.
There's no way that's new construction. It was probably done long after the plug was installed.
 

·
IBEW L.U. 1852
Joined
·
5,261 Posts
Good advice for sure Mag.....however, looking at the condition of those walls above the ceramic and wooden trim, I would have to say that nothing on that job was planned. Looks like years of reno's to me.
 

·
NJ-IEC
Joined
·
14,387 Posts
Discussion Starter · #11 ·
It's an Outback Steakhouse btw and judging by the tall chair at the bar it's an old building. Keep feeling like the swing in this chair is about to give way.
 

·
Registered
Joined
·
1,083 Posts
Plans lol. When my normal gigs are slow and i end up with the crew roughing new construction first thing i ask the "gc" is whats the tile plans? Halfway? All the way? Border? Normally the response is" ya know i dont even know let me call the buyer"
 

·
NJ-IEC
Joined
·
14,387 Posts
Discussion Starter · #13 ·
Next72969 said:
Plans lol. When my normal gigs are slow and i end up with the crew roughing new construction first thing i ask the "gc" is whats the tile plans? Halfway? All the way? Border? Normally the response is" ya know i dont even know let me call the buyer"
Been there, done that!

Planet ugly is not my fault later!
 

·
felonious smile.
Joined
·
15,934 Posts
I just do 40" off rough floor in bathrooms, always fits under tile line, my commercial job got funked like what's posted when they decided wood trim directly at me switch and receptacle hieght, oh well, I'm not loosing any sleep over it.
 
  • Like
Reactions: wisparky

·
NJ-IEC
Joined
·
14,387 Posts
Discussion Starter · #15 ·
Shockdoc said:
I just do 40" off rough floor in bathrooms, always fits under tile line, my commercial job got funked like what's posted when they decided wood trim directly at me switch and receptacle hieght, oh well, I'm not loosing any sleep over it.
I normally do 42" to the bottom of the box.

That's the correct way!
 

·
:-)
Joined
·
3,670 Posts
Canada:

Bathroom = 34" counter, 4" back splash, +2" = 40" bottom
Kitchen = 36" counter, +4" back splash +2" = 42 bottom.
 

·
Electricity is Amazing!
Joined
·
914 Posts
46" top of box off rough floor.
To many high rise backsplashes
 
1 - 20 of 24 Posts
Top