Electrician Talk banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1,959 Posts
I don't know of any product specifically designed for this, but it doesn't sound like it would be something that tough to make, especially for a medium size and larger screw base. You could use break off the other glass and gut the bulb's inside and use some 5 minute epoxy and a cheap $5 laser pointer. You could make one for each size base you use.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top