Electrician Talk banner
Status
Not open for further replies.
1 - 20 of 34 Posts

·
Professional Contractor
Joined
·
18 Posts
Discussion Starter · #1 ·
Okay so I don't have a switch, I have a relay I want to do. I spent some time making a very easy to understand diagram.

Basically, I want the switch to work like this:

ON:
Wire A is DISCONNECTED
Wire B is CONNECTED
Wire C is CONNECTED

OFF:
Wire A is CONNECTED
Wire B is DISCONNECTED
Wire C is DISCONNECTED

All three wires are POSITIVE. basically, I need power to wires B and C if ON, and if OFF then I need power only to wire A.

Here is the schematic:

 

·
Registered
Joined
·
8,050 Posts
DIYguy said:
Why would this thread possibly be locked.
Because you blatantly ignored the sites rules that say this is a forum for professionals not DIY hobbyists
 

·
animal lover /rat bastard
Joined
·
13,547 Posts
you have failed to specify the control voltage and the power requirements for the outputs

this looks like another homework question
 

·
Professional Contractor
Joined
·
18 Posts
Discussion Starter · #12 ·
you have failed to specify the control voltage and the power requirements for the outputs

this looks like another homework question
Actually I already have all that covered. I just need to wire it like so. Didn't need to ask more complicated things, but if you're wondering this is for automotive wiring, and

A: original wiring
B: has a resistor
C: wired to alternate relay

However, this is irrelevant to the original post and thus would only confuse things, which is why I did not include that info.

You don't need to know anything but:

connect one, disconnect two (with one switch), and vice-versa for on.
 

·
Electrical Contractor
Trying to retire or at least slow down a bit, but life not cooperating
Joined
·
5,261 Posts

Attachments

·
Professional Contractor
Joined
·
18 Posts
Discussion Starter · #15 ·
Yeah, sure, I'm a troll, asking a legitimate question? Learn what "troll" means before saying stupid things. In fact, you are the one trolling.
 

·
RIP 1959-2015
Joined
·
39,618 Posts
Yeah, sure, I'm a troll, asking a legitimate question? Learn what "troll" means before saying stupid things. In fact, you are the one trolling.

Since you're a contractor trying to cut out the electrician,TELL us why this 12 year old girl had to die,,Because of poor electrical work...


http://www.salina.com/news/jayden-II




.
 

·
Professional Contractor
Joined
·
18 Posts
Discussion Starter · #19 ·
Since you're a contractor trying to cut out the electrician,TELL us why this 12 year old girl had to die,,Because of poor electrical work...
.
I'm not trying to "cut out the electrician". This is a private project. And certainly it's not possible for anyone to die unless I planted a bomb. I wish people here would act more like professionals instead of posting like it's Reddit.
 

·
RIP 1959-2015
Joined
·
39,618 Posts
I'm not trying to "cut out the electrician". This is a private project. And certainly it's not possible for anyone to die unless I planted a bomb. I wish people here would act more like professionals instead of posting like it's Reddit.
:laughing::laughing::laughing::laughing::laughing:
 
1 - 20 of 34 Posts
Status
Not open for further replies.
Top