Need some help...

Hi, I just registered. I'm not an electrician, but I figured this would be the perfect place to ask my question if it is allowed. I am trying to install an Intermatic GM40 time switch. I have an ice machine at my fishing camp, so to save electricity, I purchased this timer to control the power supply so that the machine comes on Thursday nights and goes off Sunday afternoons. Like I said, I'm certainly no electrician, so please excuse my ignorance on this. I have mounted the timer next to my ice machine. The timer will only control one outlet (115). So, the object here is simple. I'm taking one wire feed, connecting the timer, then running a wire feed to the outlet to be controlled. As you will see from my pictures below, there is a buss at the bottom, and a wiring diagram. However, I don't have the capability to read this diagram. It is embarrasing, because it seems that it should be simple. Please review the following pictures and let me know where to feed the hot and neitral wires into the buss. Then, where I should tie in my outlet. Thanks for the help. I apprieciate it.