Electrician Talk banner
1 - 4 of 4 Posts

·
Registered
Joined
·
218 Posts
Discussion Starter · #1 ·
Hey guys I am in a jam to finish a a house tomorrow and the builder is telling me we require smoke/carbon detectors in all locations including the bedrooms?

As far as I am aware, smoke/carbon detectors 1 on each floor in hallways between bedrooms, and the detectors inside the bedroom can be just regular smoke detectors? Anyone familiar with this
 

·
Registered
Joined
·
218 Posts
Discussion Starter · #5 ·
Hey frunker, Ill post up as soon as I know. Im going down to city hall they said they can give me a copy of the BC Fire Code. I usually include all detectors in my jobs, so if we can get away with just smokes ( not combo's ) in bedrooms then ill be saving myself a few hundred bucks per house. Kind of kicking myself in the but as to why I didnt check before.
 

·
Registered
Joined
·
218 Posts
Discussion Starter · #6 ·
So had a inspector call me back today. This is what I learned

If the house does not have natural gas and does not have an attached garage, then no carbon detectors are required. If one of the two is in the house, carbon detectors are required on floors where there is a bedroom and withhin 5m of any bedroom door. If there is a gas fireplace in the bedroom, then a carbon detector is required inside the bedroom
 

·
Registered
Joined
·
218 Posts
Discussion Starter · #8 ·
Awesome man, thanks for the update.

So theoretically a house with bedrooms all the one level could only require 1 combo unit. Many houses I do will still need 3, but that's better than all 7 being combo.
Yup a lot of houses all bedrooms are up. I wish I checked into this sooner, ive done probably 10+ houses since the new smoke detector code came out and ive put combos into the bedrooms :( At $50 per combo over $12 per smokey thats a big frunkkin loss :O(

Expensive lesson but far cheaper than university!
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top