Electrician Talk banner
1 - 1 of 1 Posts

·
Registered
Joined
·
81 Posts
If you checked for phase to phase or phase to ground with your meter after the circuit blew up, there is a good chance it blew clear and now you probably dont see any short, but nothing works either. Light fixtures are easy to screw up even if the wiring is correct, all you need to do is pinch a wire between the belly pan and cover or something, or have a wirenut slip one of the small #16 wires.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top