Electrician Talk banner

Replacing Zinsco panel guts?

4073 Views 6 Replies 6 Participants Last post by  Bootss
I have a flush-mounted Zinsco 200A meter panel on the outside of a house that needs to be replaced. Unfortunately, it's flush mounted into a brick wall. I'd like to replace the interior and front cover and use the old can, as it will be hellish to remove. Eaton makes new interiors for some panels, but they all appear to be for interior panels without meters. This is one of those Zinsco panels with a meter centered above a horizontal row of breakers.
Any suggestions?
1 - 7 of 7 Posts
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top