Electrician Talk banner
1 - 1 of 1 Posts

· Registered
1 Posts
Discussion Starter · #1 ·
Dear All,
i am trying to automate the kitchen lighting system for a disabled person, converting it to an automated system.
An infrared remote transmitter will replace the switch and remote will be with the user (wheelchair) to switch the kitchen light on/off.

Attaching image of the wireless transmitter and existing kitchen switch setup. - the kitchen switch i believe is connected to IN-OUT single circuit, no earth
- the wireless tyransmitter has 6 wires to control 4 light switches but only one will be used.
- there are instruction on the box (image attached) but unfortunately not very clear.
- any help on remote syncronisation would also be very helpful.

https://www.dropbox.com/s/z5csk4c91t5pkar/Photo 24-11-2013 10 07 56.jpg

https://www.dropbox.com/s/u7gmlmx087psb3t/Photo 24-11-2013 20 38 41.jpg

many thanks
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.