Electrician Talk banner

Residential lighting design tools

3211 Views 1 Reply 2 Participants Last post by  lightpro
I am an electrical contractor in NJ/NY, and I would like to get a hold of some good lighting design software. Can anyone point me in the right direction. I only do residential work so I am looking for something to help me with that type of lighting.;)
1 - 2 of 2 Posts

· Registered
Joined
·
1 Posts
lighting design program

I recommend Dialux. Almost as good as the professional products, and it's free. There is also a free, little, handy program called <lightbeams> on the commercial side of the GE Lighting website. You load a specific lamp type--[it'll be a GE product]--and see what the direct illuminance would be.
With care you can import photometric files from other makers.
The best tool for general fixture choices is Photometric Toolbox from Lighting Analysts, but that's for really manipulating those files.

Hope this helps.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top