Electrician Talk banner
1 - 7 of 7 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
A regular customer of mine moved out of a commercial building (it use to be a circut city before my customer) and as a trade in services(helping with the move) I was able to strip and remove what I could and keep and sell it.
I am looking around trying to find info and the right way to sell a starline busway.
I have about 100ft and about 90 tap boxes give or take a few and 2 feed boxes.
I want to make money but at the same time sale it all together if possible but also make it to where it might save someone a few bucks. (Pay it forward) it's hard out there for us small business guys...
Any remarks and info is wanted
Thank you!
 

·
Salty Member
Joined
·
31,081 Posts
I would probably toss or scrap the bus and its fittings. Very few people are going to install used bus on a new project.

On the other hand that taps may be of interest, I would try to sell those.
 

·
Tool Fetish
Joined
·
985 Posts
I would see if any re-manufacturers would be interrested. I, like BBQ, would not sell used equipment. I have recommended to a few customers to purchase reconditioned bussduct and I installed it for them. It was all remanufactured and I did not have to handle any warranty issues. It was probably 25% of the cost for new.
 

·
Registered
Joined
·
5,448 Posts
I would probably toss or scrap the bus and its fittings. Very few people are going to install used bus on a new project.

On the other hand that taps may be of interest, I would try to sell those.
Agree on both points :thumbup:
 
  • Like
Reactions: Olddogelectrican
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top