Electrician Talk banner

Support from an LB?

2282 Views 1 Reply 2 Participants Last post by  shazam
I have a 4ft piece of RMC coming out of the ground with an LB going into the back of a panel. Where does the strap need to be placed? Is it within 3 foot of the termination? Thanks
1 - 2 of 2 Posts
I have a 4ft piece of RMC coming out of the ground with an LB going into the back of a panel. Where does the strap need to be placed? Is it within 3 foot of the termination? Thanks
334.30 (A) = 3 feet
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top