Electrician Talk banner

Welded Wire Mesh Grounding

6106 Views 10 Replies 9 Participants Last post by  someonespecial
Working on a job that has welded wire mesh instead of rebar in every concrete pad for switchgear and transformers, etc. The wire only has a diameter of .192" inches. It has to be bonded to the ground ring (4/0) and I'm trying to figure out what type of lug or crimp to use.

Having trouble finding something that matches that wire range. Any suggestion appreciated
1 - 1 of 11 Posts
Have you looked into cad weld?
  • Like
Reactions: 1
1 - 1 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.