[RodDriver]

 

[frankendodge]

Is that nmd strapped to the wall? Looks small to boot.
Forget the ground rod. You should be there putting a new service on that house.

 

[Slay301]

Is that nmd strapped to the wall? Looks small to boot.
Forget the ground rod. You should be there putting a new service on that house.

I think he was…..

 

[BleedingLungsMurphy]

Is that nmd strapped to the wall?

I'm more conerned about the radius of that bend into the wall. Looks like they hammered it flat to the wall..

 

[RodDriver]

I don't know what you guys are looking at. It's #2 SEU run in normal fashion. The Romex is being used as rope.

 

[wcord]

I'll bite.
Why the loomex around the handle?
What is the round thing hanging from the hammer drill

 

[Southeast Power]

OK, Just tell us about that weight

 

[MotoGP1199]

I'll bite.
Why the loomex around the handle?
What is the round thing hanging from the hammer drill

OK, Just tell us about that weight

NM around handle is holding the barbell weight so he doesn't have to push down on the hammer drill as hard(or at all)

 

[RodDriver]

Romex holding trigger. Another suspending a 25lb weight.

 

[Slay301]

I think your working harder rigging that deal up than it would be to push on that deal

 

[kb1jb1]

You guys are allowed to leave the service cable exposed? We have to enclose it in #80 PVC if below 8 feet.

 

[wcord]

Not a BLUE believer, but Bosch has a rotary hammer that doesnt need a weight to drive rods.
That whole contraption is too much work

 

[RodDriver]

I think your working harder rigging that deal up than it would be to push on that deal

Not at all. It takes a few seconds and then I do something else while it runs.

 

[RodDriver]

Not a BLUE believer, but Bosch has a rotary hammer that doesnt need a weight to drive rods.
That whole contraption is too much work

It's practically no work at all and it cost me nothing.

 

[RodDriver]

You guys are allowed to leave the service cable exposed? We have to enclose it in #80 PVC if below 8 feet.

Canada?

 

[Slay301]

Not at all. It takes a few seconds and then I do something else while it runs.

I bet I could drive a ground rod quicker than u could rig that and put it away.

 

[kb1jb1]

I bet I could drive a ground rod quicker than u could rig that and put it away.

John Henry?

 

[Southeast Power]

Romex holding trigger. Another suspending a 25lb weight.

I had to go back and look but, reading your comment, I thought you had It rigged to release the trigger when
The plate touched the dirt.
Please revise and resubmit

 

[RodDriver]

I bet I could drive a ground rod quicker than u could rig that and put it away.

Man, the weight goes over the rod and hangs from the handle. It takes literally no time at all and I can leave and come back and it's done. Bunch of pessimists in this group.

 

[readydave8]

I like it, but never noticed rod taking very long to drive with my rotary hammer. How long usually to drive with that?